Rules

Monday, 6 July 2026

Wrapping up the Zulus and starting on the British infantry

For the moment, I have wrapped up painting my plastic HaT 20mm Zulu army with the completion of four command bases last week. They are based on 2 x 2-inch squares I cut out from a large sheet of 3mm MDF purchased from the hardware store. For one of these commanders, I converted a figure and used a spare horse so the commander could be mounted. This base will be used as the overall commander.

Zulu command bases

With the Zulu army complete (at least for now) I started painting some of the British infantry this past weekend (it was wet so no gardening). The first decision was what size of the base and number of figures per base?

Testing out base sizes and number of 20mm figures per base.

The Zulu army is based on 4 × 3-inch bases, which is the size I use for most of my armies. Each base has 12 figures, and a unit consists of two bases, giving a total of 24 figures. In the Black Powder rules and its Zulu supplement, which I plan to use for my games, units are classed as either Small or Standard. In my games, a Small unit will be represented by a single base, while a Standard unit will consist of two bases.

For the British, I wanted to give the appearance of the "Thin Red Line." So I kept the base width at 4 inches but reduced the depth from 3 inches to 1.5 inches. This allows eight figures to fit comfortably on each base, giving a Standard unit of two bases a total of 16 figures.

The completed 16 figure unit with 2 bases.

I originally considered making British units around half the size of a Zulu unit, but doing so would have required smaller base widths, not what I wanted. Although each British base only has a third fewer figures than a Zulu base, the shallower formation gives the impression of a much smaller unit and the "Thin Red Line" appearance I was hoping for.

A comparison between the British and Zulu bases.

As with all of my 20mm projects, I have used my usual block-painting approach with a glossy finish. I keep my painting simple, adding just enough detail to create the impression of straps and equipment. These armies are intended for the three-foot rule when on the tabletop rather than any close-up views. I also find that, at this scale, trying to pick out every tiny detail is becoming increasingly tricky with my eyesight.

A tabletop view.

This approach to painting is partly about speed. There are a lot of figures to paint, and I would much rather finish the project and play some games than end up with an incomplete project sitting on the shelf.

30 comments:

  1. Figures look great and so does your basing!

    ReplyDelete
    Replies
    1. Thanks. I an happy the they turned out. Now to start on the next unit.

      Delete
  2. Awesome work Peter.
    The basing certainly gives the impression you wanted.

    ReplyDelete
    Replies
    1. Yes, the infantry bases are now all sorted out. Next I need to workout what is best for cavalry both mounted and dismounted.

      Delete
  3. Super!! They look great, the basing works well, the project is taking shape very nicely.

    ReplyDelete
  4. Lovely work

    Do you use acrylic over an enamel undercoat?

    Takes me back to film Zulu I saw in my local cinema London in 63..

    Perkin

    ReplyDelete
    Replies
    1. To get the glossy finish I apply PVA glue over acrylic paint. It also helps protect the model. I should watch the film again as it has been a while.

      Delete
  5. They look fab, I have always liked your 4x3 basing, but the decision to go with the thin red line looks spot on here.

    ReplyDelete
    Replies
    1. Thanks Norm. I was pleased how the change works for the British unit.

      Delete
  6. Great job on those figures. I'm impressed on how much smaller the British look compared to the Zulus with just a 25% reduction of troops. Great basing choice.

    ReplyDelete
    Replies
    1. It does look like a bit of an optical illusion. I think the Zulu shields help bulk out their bases visually.

      Delete
  7. They look excellent Peter, especially in the last 'action' shot!
    Can you drop me a line when you get a chance (email in my profile)? I'd like to get your postal address as there is something that I want to send to you.
    Best wishes, James

    ReplyDelete
    Replies
    1. I could not resist an action shot. An email has been sent.

      Delete
  8. The change of basing size works a treat Peter and they certainly look very good, even at 3' or more:)!

    ReplyDelete
    Replies
    1. The 3-foot rule is a useful one to apply in many cases.

      Delete
  9. I agree with everyone else Peter! It also just goes to show you can create a fantastic collection with a few boxes of relatively cheap plastic figures....they look great en masse!

    ReplyDelete
    Replies
    1. I find the “old” 20mm scale a good one to wargame with. Not being too big and not too small.

      Delete
  10. Very nice paintjob indeed. They look good. The 3-foot rule is used in railway modelling too, and with Garden railways we're mor into '10 feet rule'.

    ReplyDelete
    Replies
    1. Thank you. I have to keep reminding myself about the rule as I do the painting.

      Delete
  11. Hi Peter,

    Congratulations on finishing the Zulus! Your three-foot rule approach is definitely the way to go. It is far better to get an army finished and playing games than having half-painted figures stuck on a shelf.

    All the best, Andy

    ReplyDelete
    Replies
    1. I seem to be able to maintain my painting momentum using this approach.

      Delete
  12. That choice of basing looks absolutely spot on, Peter, and the paintwork strikes just the right balance for enough detail vs getting the job done. Great work!

    ReplyDelete
    Replies
    1. I was very happy the way the base sizes worked out. Thanks.

      Delete
  13. I also did 20mm 1/72 Zulus so good seeing yours.

    ReplyDelete
    Replies
    1. The 20mm plastic figures seem to work well for this setting as they are reasonably cheap so you can field a good number.

      Delete
  14. See mine here https://frictionbmcminiatures.blogspot.com/2020/08/golgothas-colonial-esci-italeri-zulus.html?m=0

    ReplyDelete
    Replies
    1. I like the look of some of the ESCI figures.

      Delete
  15. Excellent work on tbe figures. The basing really works.

    ReplyDelete
    Replies
    1. Thanks. I am happy with how the basing turned out.

      Delete