Monday, 24 February 2025

English Civil War battle report using activity cards

Over the past few weeks, I have been trying out some different activation mechanics for my English Civil War games. For now, I have settled on a card-based system that activates an army’s various commands. These include commands for the right wing, centre, left wing, reserve, artillery, and dragoons. The activation card deck also includes cards for rallying troops and resupplying units that have exhausted their ammunition. The cards are shuffled at the start of a turn and revealed one at a time and units in the identified command are activated. Action cards, such as rally and resupply, allow for a command to rally, reducing the number of hits accrued on 1-3 units, determined by a D3 dice, or resupply one unit that is out of ammunition.

The following battle report used this card activation approach.

A close up of the game.

Activation cards. These are shuffled at the start of each turn and commands activated as their card is revealed from the pack.

The game is based upon scenario 4, Take the High Ground, from the One-Hour Wargames book.

Background

At dawn, Sir Richard Chesley’s Royalist forces stood ready to defend a strategic hill southwest of Lower Redwich from Parliamentary troops operating in the area They are expecting reinforcements from their main army, which was advancing from the northeast. Unbeknownst to them, Sir William Harding’s Parliamentarian force had marched through the night. As the early morning mist lifted, Chesley’s men saw their enemy arrayed before them ready for Battle! A tense glance over their shoulders brought a some relief as emerging from Lower Redwich, the leading elements of reinforcements could be seen.

The tabletop setup with Parliamentarian forces on the right. Royalists positioned on the hill and around the town of lower Redwich in the background.

Order of Battle

Royalists Positioned on Hill

  • 4 units of infantry
  • 1 unit of commanded shot
  • 1 unit of artillery

Royalist Reinforcements arriving on turn 2

  • 4 units of infantry
  • 8 units of cavalry split into in two commands each of 4 units

Parliamentarian forces

  • 6 units of cavalry, 2 on the left wing and 4 on the right wing
  • 8 units of infantry, 5 in the centre and 3 in reserve behind the right wing.
  • 2 units of dragoons supporting the right wing.
  • 2 units of artillery positioned between the centre and right wing.

Victory Conditions

  • Uncontested control of the hill.

Special Rules

  • Royalists reinforcements cannot move from their Lower Redwich positions until turn 2.
  • Once an force has lost more than half of its units it cannot launch further attacks.

Battle Report

Opening moves...

As the morning fog lifted, Sir Harding ordered his Parliamentarian forces forward, with artillery bombarding the Royalist held hill. 

Artillery begin their bombardment.

On the right, Parliamentarian cavalry advanced just north of the road, while dragoons took up positions behind hedgerows in the hope of delaying the reinforcements arriving from the direction of Lower Redwich. Meanwhile, Parliament's infantry centre pressed up the slope, engaging the defenders head on. Their left wing cavalry were ordered to flank the Royalist position.

Before long,  Sir Harding’s right-wing cavalry and dragoons found themselves engaged in combat with the Royalist cavalry, while a column of Royalist infantry were seen marching swiftly down the road to join the fray.

Parliamentarian forces advance upon the hill top while their right wing attempts to delay Royalist reinforcements.

The Royalist defenders on the hill are hard pressed from all sides.

Mid game...

Sir Chesley’s defenders on the hill were under immense pressure and beginning to waver. They required multiple rallies to hold firm as Parliamentarian forces pressed their attack. Their artillery had already fallen to enemy cavalry, but Chesley’s spirits lifted at the sound of battle on his left. Royalist reinforcements had engaged the Parliamentarian troops.  

Sir Harding was initially pleased in his right wing’s success in delaying the Royalist advance. However, his confidence wavered as his right wing cavalry were driven back to the base of the hill just as his infantry had routed most of the defenders and were preparing to move onto the hill. Amid this chaos, Sir Richard Chesley lay dead among his fallen defenders. 

Further to the right, Harding’s dragoons withdrew to join his reserve infantry, now the last line of defence against the surging Royalist cavalry and infantry.

The hill's defenders are being hard pressed.

Royalist reinforcements are advancing and forcing back Parliamentarian units.

End Moves...

The Royalist right wing cavalry routed their opponents and occupied the hill as the Parliamentarian infantry advanced. Meanwhile, after regrouping, the Royalist left wing cavalry launched another charge, breaking most of Parliament’s reserve infantry. However, the Parliamentarian infantry in the centre proved too strong for the Royalist horse, driving them from the hill.  

As the relatively unscathed Royalist infantry finally arrived, both armies found themselves with half their forces routed. Neither side was eager to press the attack further, leaving Sir Harding’s troops in control of the hill. That night, Harding penned a letter to his superiors in London, reporting his hard-fought victory.

Royalist forces press forward.

Parliament forces finally gain control of the hill.

Next up some medieval forces may get on to the tabletop.


Sunday, 16 February 2025

Busy Painting

Not much to write about this week, mainly photos as I have been busy painting and managed to complete four units. The week began with a unit of Spencer Smith Hussars, which had jumped to the top of my painting queue. These Hussars, gifted by a fellow wargamer (see here), will be used in my Napoleonic wargames. I was eager to get started on them. They are simple models that I paint in a toy soldier style with a glossy finish.

The Hussar miniatures certainly give the impression they are charging forward.

The figures are painted in a simple toy soldier style and glossed.

After finishing the Hussars and settling into my painting groove, I turned my attention to a few English Civil War miniatures that had been prepped many months ago, before our move to New Zealand. The units consist mainly of Hinchliffe miniatures, with a few Minifigs mixed in.

You can never have enough artillery.

Some Hinchliffe cavalry with a dragoon interloper who had lost their flintlock and has been repurposed to carry the standard. 

A Commanded Shot unit with a mix of Minifigs and Hinchliffe.

On the tabletop, I've played a couple of quick English Civil War games to test a couple of different activation mechanisms, one being card-based activation and the other a dice draw approach. Both approaches include steps for resupplying units that run out of ammunition. So far, I'm leaning towards the dice draw approach as it provides more choice for the wargamer as to which command to activate.

A close up shot of a game.

Testing out a dice draw approach in this test game.


Saturday, 8 February 2025

French and Indian War ship and landing boats

As part of my preparations for a French and Indian War (FIW) campaign, I have made a two-dimensional ship using leftover MDF sheets from a shelving project. I cut the basic hull shape from two MDF pieces and glued them together. After attaching the masts, I cut out some furled sails from a thin 3mm MDF board, which I typically use for model bases. Finally, I painted the ship.

A landing party.

The ship was intentionally designed in two dimensions (or perhaps 2.5, as it has some depth) to keep to a minimum the tabletop space occupied by a river or the sea in any given scenario. So the model had to fit on a 6-inch strip of blue felt without looking like it had become beached. After completing the ship, I thought it would add to the look by adding a couple of landing boats. The same space constraints applied, the boats were also kept relatively flat and were also scaled down for perspective.

Additional troops are brought ashore.

To create the landing boats, I took a screenshot from a painting titled “The Taking of Quebec” from the National Army Museum's online collection. I focused in on one of the boats unloading troops in the picture. Then imported the image into Google Slides, made a copy and flipped it, before aligning the two halves in a mirror image.

The two halves of the same picture lined up as mirror images.

The image is then folded and sandwiched around some thin card.

After printing, I folded the images and glued them around a piece of cardboard to add strength. Once the glue was dry, I trimmed around the image and attached two 3mm MDF pieces to either side, shaping them to match the boat.

After cutting out the image. Two bits of 3mm MDF were cut and shaped to match the boat. Very fiddly!

It was tempting to leave the boat as just a printed image, but my printer is not that good at printing colour, it all looks a bit faded. So, I decided to brighten up the crew with some paint, almost like colouring by numbers, but in a loose painting style.

A comparison between the painted and printed versions.

The final steps involved using a grey felt-tip pen to go around the edges so they were not white and tidy up any rough areas of the painting. I then added some round plastic rods for the oars and applied a layer of PVA glue to seal everything and give it a nice glossy finish.

Some final touches and oars were added.

Landing parties being taken ashore.

I might use the ship and boats in a scenario before starting the campaign.

Wednesday, 5 February 2025

A surprise package and some horse models

Today, I received a package in the mail containing some plastic Spencer Smith Hussars. They were a generous gift from Neil of the aufklarungsabteilung.blogspot, who reached out after I mentioned in a recent post needing to use some 28mm Hussar figures having run out of Spencer Smith Hussars (see here). He had some spare and kindly offered to send them my way, an offer I gladly accepted. These will be soon moving up the painting queue! 

New recruits.

At the moment, my painting table is occupied by a scratch-built two-dimensional ship and a couple of boats for my French and Indian War (FIW) games, where I’m adding an amphibious element. More on them in the next post.

A recent purchase to be used for some more carts, wagons, and limbers.

Additionally, I bought some horse models to build more wagons and artillery limbers, continuing on from my recent scratch-building efforts to add carts to my FIW armies (see here).

Finally, some photos of an English Civil War game…

The tabletop all laid out ready for a game.

A view of the infantry all lined up.

The cavalry stand ready.